5 config > network > wan – Planet Technology Network Device MAP-2105 User Manual

Page 53

4.3.5 Config > Network > WAN

This panel consists of two parts: the upper part allow user to select the WAN Interface type to use

and the lower part is used to configure the network settings. In order to select a WAN Interface,

select on the desired type and type the Configure Details button.

Note: the MAP-2105 does not support PPPoE connection type.

The network setting portion enables the configurations on the DNS (Domain Name Service). This

feature translates the domain name into IP Address form, which recognized by the Internet. This

translation is done through its own server. If the primary server failed to perform the translation,

the secondary server will take over the process.

The parameters of the Network panel:

Gateway

Specify the gateway for the static IP Address