Panasonic DMP-BD35 - Manual (Page 7)

7
RQT9248
C Connecting to VIDEO OUT terminal
NOTE
TIPS
≥Connect terminals of the same
color.
≥High definition video cannot be
output with this connection.
Use connection
A or B (> 6) for
high definition video.
§ With audio cables, connect the
AUDIO OUT terminals to the
two-channel audio input terminals
of an analog amplifier/receiver or
system component in place of a
television to enjoy stereo sound.
To enjoy a richer sound
≥Use connections D or E (> 7, 8)
additionally.
(Unplug the red and white plugs.)
AUDIO IN
R L VIDEO IN
AUDIO/VIDEO IN
2ch AUDIO OUT §
Television
Audio/Video cable
(included)
VIDEO OUT
Back of the unit
Connecting an amplifier/receiver
D Connecting to HDMI AV OUT terminal
When connected to a compatible amplifier/receiver, you can enjoy surround sound recorded with Dolby Digital Plus, Dolby TrueHD or
DTS-HD.
NOTE
TIPS
NECESSARY SETTINGS
≥“HDMI Video Mode” and “HDMI
Audio Output”: “On” ( > 26)
≥“Digital Audio Output”: Depending
on the connected amplifier/receiver
(
> 25)
With this connection, you can use
VIERA Link “HDAVI Control”
(
> 21).
≥This unit comes equipped with a
Dolby Digital Plus, Dolby TrueHD
and DTS-HD decoder. When an
amplifier/receiver with 7.1ch
speakers that support HDMI (High
Bit rate Audio) is connected using
High Speed HDMI cable, you can
enjoy surround sound recorded with
Dolby Digital Plus, Dolby TrueHD or
DTS-HD. (
> 16)
HDMI IN
Multi channel speakers
HDMI cable
HDMI compatible
amplifier/receiver
HDMI
compatible
television
HDMI IN
HDMI OUT
Back of the unit
Ge
tti
ng s
ta
rte
d
DMP-BD35GT&GN-RQT9256_eng.book 7 ページ ２００８年９月２４日 水曜日 午後５時５分