Specifications, Electrical connections – Panasonic CQ-DFX572U User Manual
Page 27
E
N
G
L
I
S
H
CQ-DFX572U
61
Specifications
E
N
G
L
I
S
H
45
CQ-DFX572U
60
E
N
G
L
I
S
H
46
Electrical Connections
(Continued)
❐ Upgrading the System
Example Combination
≥
CD changer (CX-DP88U, option)
≥
Stereo power amplifier
Note:
≥
For wiring, carefully read the operating instructions for the devices connected.
CQ-DFX572U
CD changer control connector
R
(Red)
L
(White)
Stereo power
amplifier
Subwoofer speakers
CD.C-IN
R (Red)
L (White)
S.W-OUT
DIN cord
BATTERY
Fuse (3 A)
Extension cord
(included for CX-DP88U)
CD changer
CX-DP88U
Ground lead
Battery lead
6 Power connector
❐ General
Power supply:
12 V DC (11 Vj16 V), test voltage 14.4 V, negative ground
Current consumption:
Less than 2.2 A (CD play mode; 0.5 Wa4 channels)
Maximum power output:
50 Wa4 channels at 1 kHz, volume control maximum
Tone adjustment range:
Bass:
n
12 dB at 100 Hz
Treble:
n
12 dB at 10 kHz
Suitable speaker impedance: 4j8 ≠
Preamp output voltage:
2.5 V (CD play mode; 1 kHz, 0 dB)
Subwoofer output voltage:
2.5 V
Pre-Amp output impedance: 200 ≠
Subwoofer output impedance: 200 ≠
Dimensions (WaHaD):
7za1
15
/
16
za
5
7
/
8
z
(178a50a150 mm)
Weight:
3 lbs. 8 oz (1.6 kg)
❐ FM Stereo Radio
Frequency range:
87.9 MHzj107.9 MHz
Usable sensitivity:
11.0 dBf. (1.25 ¨V, 75 ≠)
50 dB quieting sensitivity:
15.2 dBf. (1.6 ¨V, 75 ≠)
Frequency response:
30 Hzj15 kHz (n3 dB)
Alternate channel selectivity: 75 dB
Stereo separation:
35 dB (1 kHz)
Image response ratio:
75 dB
IF response ratio:
100 dB
Signal/noise ratio:
70 dB
❐ AM Radio
Frequency range:
530 kHzj1 710 kHz
Usable sensitivity:
29 dB/¨V (25 ¨V, S/N 20 dB)
❐ CD Player
Sampling frequency:
8 times oversampling
DA converter:
MASH·1 bit/4 DAC system
Error correction system:
Panasonic super decoding algorithm
Pick-up type:
Astigma 3-beam
Light source:
Semiconductor laser
Wave length:
780 nm
Frequency response:
20 Hzj20 kHz (n1 dB)
Signal/noise ratio:
96 dB
Total harmonic distortion:
0.01 % (1 kHz)
Wow and flutter:
Below measurable limits
Channel separation:
75 dB
MP3 decoding:
MPEG 1 Audio Layer 3/MPEG 2 Audio Layer 3
Bit rate:
(MPEG 1 Audio Layer 3) 32 kbpsj256 kbps, VBR (Variable Bit Rate)
(MPEG 2 Audio Layer 3) 16 kbpsj160 kbps, VBR (Variable Bit Rate)
Sampling frequency:
(MPEG 1 Audio Layer 3) 32 kHz, 44.1 kHz, 48 kHz
(MPEG 2 Audio Layer 3) 22.05 kHz, 24 kHz
Above specifications comply with EIA standards.
Note:
≥
Specifications and the design are subject to modification without notice due to improvements in technology.