Perle Systems IOLAN CSS - Manual (Page 99)

Line Commands 97
Email Commands
Email Commands
Set Email-Alert Line
Description This command configures email alert parameters for the line.
User Level Admin
Syntax
set email-alert line <number>|* [from <email_addr>]
[level emergency|alert|critical|error|warning|notice|info|debug]
[mode on|off] [to <email_addr>] [reply-to <email_addr>]
[smtp-host <string>] [subject <string>] [use-server on|off]
Options from
This field will be specified in the from field of the email message sent by the IOLAN.
level
Choose the event level that triggers an email notification:
z Emergency
z Alert
z Critical
z Error
z Warning
z Notice
z Info
z Debug
The list is in decreasing order of priority ( Emergency has the highest priority). You are
selecting the lowest notification level; therefore, when you select Debug , you will get
an email notification for all events that trigger a message.
mode
Determines whether or not email notification is turned on. Default is Off .
to
An email address or list of email addresses that will receive the email notification.
reply-to
The email address to whom all replies to the email notification should go.
smtp-host
The SMTP host (email server) that will process the email notification request. This can
be either a host name defined in the IOLAN host table or the SMTP host IP address.
subject
A text string, which can contain spaces, that will display in the Subject field of the
email notification.
use-server
Determines whether you want the Line to inherit the Email Alert settings from the
Server Email Alert . If this is enabled, Server and Line notification events will have the
same Email Alert setting.