Maintenance, Clutch system, Tool kit – Polaris Trail RMK User Manual
Page 96: Chain tension, Fall tune-up
93
MAINTENANCE
Clutch System
Torque Stop
Periodically check torque stop
clearance. With clutches in
proper alignment, the torque stop
clearance should be .010-.030
inch (.25-.75 mm) from the
engine case.
Adjust if necessary, and lock the
jam nut.
Tool Kit
A tool kit is included with each machine for emergency and routine
maintenance. Always keep the tool kit with the snowmobile.
Chain Tension
Maintain the proper chain tension as outlined on page 82.
Fall Tune-Up
For maximum performance, arrange for a fall service tune-up with your
Polaris dealer.
.010-.030 in.
(.25-.75 mm)
See also other documents in the category Polaris Cars:
- Sportsman 6x6 (136 pages)
- Sportsman 6x6 (133 pages)
- Sportsman 500 EFI X2 (157 pages)
- Predator 50 (189 pages)
- Predator 50 (184 pages)
- Predator 50 (148 pages)
- Predator 50 (191 pages)
- Predator 50 (186 pages)
- Predator 50 (192 pages)
- Predator 50 (199 pages)
- Predator 50 (199 pages)
- Predator 50 (188 pages)
- Predator 50 (207 pages)
- Predator 50 (220 pages)
- Predator 50 (199 pages)
- 800 RMK 144/155 (176 pages)
- 800 RMK 144/155 (135 pages)
- 800 RMK 144/155 (141 pages)
- 800 RMK 144/155 (159 pages)
- 800 RMK Shift (133 pages)
- 800 RMK 144/155 (160 pages)
- 800 RMK Shift (135 pages)
- 800 RMK 144/155 (134 pages)
- 600 IQ LX (154 pages)
- Predator (187 pages)
- Predator 9920779 (191 pages)
- Sportsman 600 (200 pages)
- Sportsman 600 (220 pages)
- Sportsman 600 (202 pages)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (2 pages)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- Sportsman 500 EFI Touring (149 pages)
- Sportsman 700 EFI X2 (163 pages)
- Series 10 Ranger 425 2x4 (104 pages)
- Series 10 Ranger 425 2x4 (121 pages)
- Sportsman 9922245 (133 pages)
- Sporstman X2 800 EFI (161 pages)
- SuperSport (1 page)
- SuperSport (1 page)
- SuperSport (1 page)