beautypg.com

Operation, Throttle lever, Warning – Polaris Trail RMK User Manual

Page 61

background image

58

OPERATION

n

Throttle Lever

If the engine stops abruptly when the throttle lever is released:
1. Turn the ignition switch to OFF.
2. Visually inspect the throttle cable and carburetor(s) to determine

what caused the safety switch to activate.

3. Test the throttle lever by compressing and releasing it several times.

The lever and cable must return to the idle position quickly and

completely.

4. If the throttle lever operates properly, turn the ignition switch on and

go through normal starting procedures.

5. If the engine doesn’t start, take the snowmobile to an authorized

Polaris dealer for service.

Excessive free play in the throttle cable may cause the safety switch to

activate, preventing the engine from starting. If this occurs, return the

machine to an authorized Polaris dealer for service.

If an emergency exists and it’s necessary to start the engine, the throttle

safety switch and engine stop switch may be disconnected from the wire

harness. When these switches are disconnected, the ignition key switch

must be used to shut off the engine. DO NOT continue to operate the

machine with the throttle safety switch disconnected. Return the

machine to an authorized Polaris dealer for service as soon as possible.

WARNING

An improperly functioning throttle lever may cause erratic machine behavior

and loss of control, which could result in serious injury or death. If the throttle

lever does not work properly, DO NOT start the engine.