Polaris Trail RMK - Manual (Page 46)

43
PRE-RIDE INSPECTIONS
Before Starting the Engine
n
Brakes
Properly functioning brakes are critical to your safety. Always check the
following items to assure proper operation before starting the engine.
Brake Lever Travel
Squeeze the brake lever. It
should move no closer to the
handgrip than 1/2 inch (1.3
cm). A smaller distance indi-
cates low brake fluid level or
air in the hydraulic system.
See pages 84-85 or see your
dealer for service.
Lever Feel
If the brake lever feels “spongy” when squeezed, check the brake fluid
level and condition. Also check for the presence of air in the fluid sys-
tem. See pages 84-85 or see your dealer for service.
Replace brake fluid at least every two years. We recommend the use of
Polaris DOT 4 high temperature brake fluid. See page 109 for the part
numbers of Polaris products.
WARNING
Continued use of “spongy” brakes may cause a complete loss of brakes,
which could result in serious injury or death. Always have the brakes serviced
at the first sign of sponginess.
1/2 inch (1.3 cm)