Panasonic KX-PW32CL - Manual (Page 3)

Scanning a document
3
Operation
indicator
Arrow direction
Operation indicator
POWER
ON
LIGHT
ON
1 Press for at least 2 seconds until you hear
a beep to turn on the power.
➡ The power indicator will light red.
2 Press repeatedly to choose the desired
resolution.
➡ You will hear a beep, and the selected resolution indicator will light.
● Resolution types
·
(FINE: For documents with small print)
· (STANDARD)
· (PHOTO: For documents containing photographs, etc.)
3 Place the Ò ” (scanning position) and the
Ò ” (document left side) on the document,
and press
➡ You will hear a beep, and the operation indicator will light green
after about 1 or 2 seconds. You can start scanning after the
operation indicator lights green.
4 Press the hand scanner against the document, and
move it slowly towards the direction of the arrow (
).
➡ When it is scanning properly, the operation indicator will flash green.
● Scanning speed for different resolution types.
“ ” (STANDARD): Move up to 50mm per second.
“ ” (FINE) “ ” (PHOTO): Move up to 25mm per second.
➡ If the scanner is being moved too quickly, you will hear a warning
beep (p.4).
POWER
OFF
LIGHT
OFF
Operation
indicator
5 After scanning the document, press
➡ You will hear a beep, and the operation indicator will turn off. The
document will be memorized as 1 page.
➡ To continue scanning another page, repeat steps 2 to 5.
6 When you have finished scanning, press for at
least 2 seconds until you hear a beep to turn off the
power.
Resolution “ ” (FINE) approx. 30 pages (document paper
size-B5, 700 letters)
Resolution “ ” (STANDARD) approx. 60 pages (document paper
size-B5, 700 letters)
Resolution “ ” (PHOTO) approx. 2 pages (a B5-size
photograph)
Scanner memory capacity