Printronix T5000e - Manual (Page 31)

Loading Ribbon
31
Loading Ribbon
1. Install the ribbon take-up core on the ribbon take-up spindle.
NOTE: The first ribbon take-up core comes with the printer.
Thereafter, use the core from the old (used up) ribbon.
2. Slide the ribbon roll onto the ribbon supply spindle until it stops
against the spindle flange.
3. Open the pivoting deck by rotating the deck lock lever fully
clockwise until the deck swings upward.
Ribbon
Roll
Ribbon Supply Spindle
Deck Lock Lever
Pivoting
Deck
Ribbon
Take-Up Core
Spindle
Flange
Ribbon
Take-Up Spindle