Panasonic CF-72 - Manual (Page 44)

6 - 4
6.8 Removing the PCB Case Unit.
PCB Case Unit
Figure 16
1. Remove the six screws , and two screws .
2. Remove the PCB case.
Screw : XYN2+J12FZ
Screw : XYN2+J16FN
6.9 Removing the Bottom Case Unit
and the Handle Unit.
Figure 17
1. Remove the two screws , and two screws .
2. Remove the bottom case unit, and remove the handle
unit.
Note : When reassemble the bottom case unit, install the power
knob before installation of the bottom case unit.
Screw : XTB2+16GFN
Screw : XTB26+20GFN
6.10 Removing the CD-ROM Drive.
CD-ROM Drive
Release the Connector
Figure 18
1. Release the connector to remove the CD-ROM drive.
6.7 Removing the LCD Section and
the LED PCB.
LED PCB
LED LED Section
Figure 15
1. Remove the two screws , and remove the LCD unit.
2. Remove the two screws , and remove the LED PCB.
Screw : DFHE5025XA
Screw : DXHM0021ZA
Handle Unit Bottom Case Unit
Power knob