Panasonic CF-72 - Manual (Page 46)

6 - 6
6.15 Removing the Bus Shutter Unit
and the Card Shutter Unit.
Figure 25
1. Remove the four screws .
2. Remove the bus shutter unit and the card shutter unit.
Screw : XQN2+J4FN
Bus Shutter Unit
Card Shutter Unit
6.16 Removing the PCMCIA CN (PC
Card Slot) and RTC Battery.
Main PCB
PCMCIA CN
(PC Card Slot)
CN3
RTC Battery
Figure 26
1. Remove the four screws .
2. Remove the PCMCIA CN (PC card slot) from the main
PCB.
3. Disconnect the connector CN3, and peel the RTC bat-
tery.
Screw : XYN2+J4FN
6.13 Removing the Sub PCB.
Sub PCB Power Knob
Figure 23
1. Remove the two screws , and remove the power
knob and the sub PCB.
Screw : DFHE5020YB
6.14 Removing the LID PCB.
LID PCB
CN704
Figure 24
1. Remove the screw , and disconnect the connector
CN704.
2. Remove the LID PCB.
Screw : DFHE5025XA