Palm TM ZIRETM HANDHELD - Manual (Page 195)

185
APPENDIX C
Non-ASCII Characters for Login Scripts
The following information enables you to create custom login scripts that require
non-ASCII characters. It is provided for advanced users who understand the use
and requirements of such characters in a custom login script.
Use of ^char
You may use the caret ( ^ ) to transmit ASCII command characters. If you send
^char, and the ASCII value of char is between @ and _, then the character is
automatically translated to a single-byte value between 0 and 31.
For example, ^M is converted to a carriage return. If char is a value between a and
z, then the character sequence is translated to a single-byte value between 1 and 26.
If char is any other value, then the character sequence is not subject to any special
processing.
For example, the string “Joe^M” transmits Joe, followed by a carriage return.
Carriage return and line feed
You may include carriage return and line feed commands as part of the login script,
when entered in the following format:
■
Sends or receives a carriage return
■
Sends or receives a line feed
For example, the string “waitfor Joe” waits to receive Joe followed by a
carriage return and line feed from the remote computer before executing the next
command in the script.