Palm Handhelds m100 - Manual (Page 147)

Chapter 5 Page 140
6. Close the HotSync Software Setup window.
Preparing your handheld
There are a few steps you must perform to prepare your handheld for
a modem HotSync operation.
To prepare your handheld for a modem HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap Modem.
Modem Identifies the type of modem connected to your
Macintosh. If your modem does not appear on
the list, use the Hayes Basic setting, or choose
Custom to enter a command string. Refer to the
manual that came with your modem to find the
appropriate command string.
Port Identifies the port that Palm Desktop software
uses to communicate with the modem. Select
the modem or printer port where you
connected the modem cable.
Modem
Speaker Activates the modem’s speaker. If you are
having trouble connecting, turn on this option
to make sure the modem connected to your
Macintosh is responding to incoming calls.
Tap here
Modem configuration