Lifescan SureStep User Manual

Page 67

test results will not be affected if
you do not set the clock to the cor-
rect time.) The time and date must
be reset every time the batteries
are replaced.

Setting the Time.

To set the time, enter the set-up
mode. The display will show the
time with the hour flashing. Press
and release the green C button to
advance one hour. To move faster,
hold the green C button down. With
the correct hour on the display,
press the blue power button and
the minutes will start flashing.

Press and release the green C button
to advance one minute. To move
faster, hold the green C button down.

With the correct minutes on the dis-
play, press the blue power button
and the year setting will appear on
the display.

Note: When the time and date are
changed, the calculated values for
the 14-day and 30-day averages may
change. These averages are calculat-
ed from the results obtained during
the 14 or 30 days preceding the cur-
rent time and date settings.

SETTINGS

LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:03 PM Page 56