Lantronix WiSpan - Manual (Page 9)

2: Introduction
WiSpan User Guide 9
Serial & Telnet Ports: There are two approaches to accessing Setup Mode: make a
Telnet connection to the network port (9999) or connect a terminal (or a PC running a
terminal emulation program) to the unit’s setup (serial) port.
DeviceInstaller: This utility provides a GUI interface for locating the WiSpan on the
network, assigning an IP address, viewing the current configuration, and updating
firmware.
Web-Manager: Once the unit has an IP address, you can configure the WiSpan and its
settings using the WiSpan’s web interface, Web-Manager.