Lantronix WiSpan - Manual (Page 24)

6: Web-Manager Configuration
WiSpan User Guide 24
Default Gateway The gateway address, or router, allows communication to
other LAN segments. The gateway address should be the IP
address of the router connected to the same LAN segment as
the unit. The gateway address must be within the local
network.
Ethernet Configuration
Auto Negotiate With this option, the Ethernet port auto-negotiates the speed
and duplex with the hardware endpoint to which it is
connected. This is the default setting.
If this option is not selected, complete the fields that become
available:
Speed: The speed of data transmission. The default setting is
100 Mbps.
Duplex: The direction of data transmission. The default
setting is Full.
3. Click OK.
4. On the main menu, click Apply Settings.
Server Configuration
Selecting Server from the main menu displays the unit’s server values. The following
sections describe the configurable parameters within the Server configuration menu.
Figure 6-3. Server Settings
To configure the WiSpan’s server settings:
1. Click Server from the main menu.