Lantronix WiSpan - Manual (Page 31)

7: Advanced Settings and Defaults (Setup Mode)
WiBox2100E User Guide 31
Disable SNMP (N) ? _
SNMP Community Name
The SNMP Community name is a required field for NMS to read or write to a device.
Enter a string of 1 to 13 characters. The default entry is public.
SNMP Community Name (public): _
Disable Telnet Setup
Caution: Disabling both Telnet setup and Port 77FE prevents users from
accessing the setup menu from the network.
This setting defaults to the N (No) option. The Y (Yes) option disables access to Setup
Mode by Telnet (port 9999). It only allows access locally by means of the web pages and
the setup port of the unit.
Disable Telnet Setup (N) ? _
Disable TFTP Firmware Upgrade
This setting defaults to the N (No) option. The Y (Yes) option disables TFTP for network
firmware upgrades.
Disable TFTP Firmware Update (N) : _
Disable Port 77FE (Hex)
Caution: Disabling both Telnet setup and Port 77FE and Web Setup prevents
users from accessing the setup from the network.
Web-Manager and custom programs use Port 77FE to configure the unit remotely. If
required, disable this capability for security purposes.
Select the N (No) option (default) to enable remote configuration by web pages, Telnet,
or serial configuration.
Select the Y (Yes) option to disable remote configuration and web sites.
Note: The Y (Yes) option disables many of the GUI tools for configuring the unit,
including the embedded Web-Manager tool.
Disable Port 77FEh (N) ? _
Disable Web Server
The Y (Yes) option disables the web server. This setting defaults to the N (No) option.
Disabling the web server also disables the web setup.
Disable Web Server (N) ? _
Disable Web Setup
The Y (Yes) option disables configuration by means of the Web-Manager (but the web
server remains active for custom web pages). This setting defaults to the N (No) option.
Disable Web Setup (N) ? _