Lexmark 4098-001 - Manual (Page 43)

Repair Information 4-9
4098-001
Sheet Feeder Removal
1. Remove all covers.
2. Remove the three mounting screws that hold the sheet feeder.
3. Remove the sheet feeder. Note the routing of the cables.
Small Feed Rollers
1. Remove all covers.
2. Remove the sheet feeder.
3. Disconnect springs from the small feed roller.
4. Press down on the friction roller assembly and remove.
Small Feed Roller Holder / EOF Removal
1. Remove all covers.
2. Remove sheet feeder assembly.
3. Remove mid frame.
4. Remove system board.
5. Depress two tabs {A} on small feed roller holder.
6. Slide holder down and remove holder and EOF flag.
Star Wheel Roller Assembly Removal
1. Remove all covers.
2. Move printhead carrier to the center of the printer.
3. Remove two screws on each end of star wheel roller assembly.
4. Remove star wheel roller assembly.