Using windows, Using macintosh – Lexmark 4600 Series User Manual
Page 89

c
Use the arrow buttons to select the quality and original image size, and then press
each time you make
a selection.
d
Press
.
Note: Do not remove the memory device until the menu indicates that the file has been saved.
•
If you choose to send the scanned image to a computer over the network (selected models only):
a
Press the arrow buttons until Network appears, and then press
.
b
If prompted, press the arrow buttons until the computer name of the network computer appears, and
then press
.
Notes:
–
You may be prompted to enter a PIN if the computer requires it. To assign a computer name and a
PIN to the network computer, see the Help for the printer software associated with your operating
system.
–
Use the arrow buttons to increase or decrease the value for each digit (the default value is 0000) in
the PIN, and then press
each time you select a digit.
c
Wait until the printer has finished downloading the scan applications list.
d
Press the arrow buttons until the application that you want appears, and then press
.
e
Use the arrow buttons to select the quality and original image size, and then press
each time you make
a selection.
f
Press
.
Note: Do not remove the memory device until the menu indicates that the file has been saved.
Using Windows
1
Open the top cover, and then load an original document facedown on the scanner glass.
2
Close the top cover to avoid dark edges on the scanned image.
3
Do one of the following:
•
In Windows Vista, click
.
•
In Windows XP and earlier, click Start.
4
Click All Programs or Programs, and then select the printer program folder from the list.
5
Click Lexmark Productivity Studio.
6
From the Photo Printing section of the main screen, click Scan.
7
Follow the instructions on the computer screen.
Using Macintosh
1
Open the top cover, and then load an original document facedown on the scanner glass.
2
Close the top cover to avoid dark edges on the scanned image.
3
From the Finder desktop, double-click the printer folder.
4
Double-click XXXX Series Center, where XXXX is the printer series.
5
From the “What is being scanned?” menu, choose the type of document to be scanned.
6
Click Scan.
89