Lexmark 4600 Series User Manual
Page 76

c
On the computer screen, select an option to save photos to the computer.
d
Follow the instructions on the computer screen.
Using Lexmark Productivity Studio in Windows
•
If you installed Lexmark Productivity Studio, and if the printer is connected to the computer through a USB cable,
then the program launches when you insert the memory device. Follow the instructions on the computer screen
to transfer photos.
•
If the printer is connected to the computer through a network:
1
Do one of the following:
–
In Windows Vista, click
.
–
In Windows XP and earlier, click Start.
2
Click All Programs or Programs, and then select the printer program folder from the list.
3
Click Lexmark Productivity Studio.
4
From the Photo Printing section of the main screen, click Download to library.
5
Browse to the location of the memory device, and then click Transfer.
6
Select the network printer.
7
Insert the memory device into the network printer.
8
Follow the instructions on the computer screen.
Using the Lexmark Network Card Reader in Macintosh
If the printer is connected to a computer through a network, then you can transfer photos from a memory card or
flash drive to the computer using the Lexmark Network Card Reader. The printer may require that you select a
computer (and a PIN, if required by that computer).
1
Insert a memory card, flash drive or a digital camera set to mass storage mode.
2
From the Finder desktop, double-click the printer folder.
3
Double-click the Lexmark Network Card Reader icon.
4
From the Source list, choose the printer that you want to use, and then click
.
Thumbnails of the photos stored on the memory device appear on the dialog.
5
If you want to enlarge the thumbnails, then click and drag the slider
.
6
Select the photos that you want to save, and then click Save.
7
Browse to the location of the folder where you want to save the photos and documents, and then click Save.
Note: For more information, see the Help associated with the application.
Using the default Image Capture application in Macintosh
If the printer is connected to the computer through a USB cable, and you have set an application to launch when a
memory device is connected to the computer, then the application automatically launches. Use it to transfer photos
to the computer.
76