Troubleshooting, Setup troubleshooting, Incorrect language appears on the display – Lexmark 4600 Series User Manual
Page 104

Troubleshooting
Using the printer troubleshooting software (Windows
only)
The Lexmark Service Center provides step-by-step troubleshooting help and contains links to printer maintenance
tasks and customer support.
To open the Lexmark Service Center, use one of these methods:
Method 1
Method 2
If it appears on an error message dialog, click the For
additional assistance, use the Lexmark Service
Center link.
1
Do one of the following:
•
In Windows Vista, click
.
•
In Windows XP and earlier, click Start.
2
Click All Programs or Programs, and then select the
printer program folder from the list.
3
Select Lexmark Service Center.
Setup troubleshooting
Incorrect language appears on the display
These are possible solutions. Try one of the following:
C
HANGE
THE
LANGUAGE
SELECTION
DURING
INITIAL
SETUP
During initial setup, and every time you reset the printer to factory default settings, you will be asked to select a
language.
To select a language, press the arrow buttons until the language that you want appears on the display, and then
press
.
S
ELECT
A
DIFFERENT
LANGUAGE
AFTER
INITIAL
SETUP
In case the wrong language was set during initial setup, you can still change the language settings of the printer.
1
From the printer control panel, press
.
2
Press
, and then press
.
3
Press
again.
4
Press the arrow buttons until the language that you want appears on the display, and then press
.
5
If you are sure, press
to change the language.
104