Land Rover DEFENDER LT77S - Manual (Page 32)

MANUALGEARBOX DEFENDER
FITTING FIFTH GEAR
to the layshaft front bearing.
packing disc should be made to the dimensions
given
to absorb the force. The plate also retains
the input shaft bearing outer track.
4. Fit a new stake nut but do not tighten.
5. Fit gear assembly to mainshaft.
CAUTION: Since the fifth gear is a tight
fit on the layshaft, the force, when
pressing the gear, must not be transfered
1. Secure the plate with two bolts. Insert
disc between plate and layshaft.
Release and invert gearbox and remove reverse
shaft retainer plate.
3. With the extraction groove uppermost, drive fifth
gear on to layshaft using 18G 1422.
I
OVERHAUL