Land Rover DEFENDER LT77S - Manual (Page 30)

MANUALGEARBOX
DEFENDER
Fit layshaft While lifting mainshaft to clear
layshaft rear bearing.
5. Turn selector shaft and interlock spool to allow
reverse lever to engage spool flange.
6. Fit reverse lever to pivot post and secure with
pin and circlip.
7. Fit slipper pad to lever.
Fit reverse gear shaft, spacer and gear.
9. Fit slipper to reverse gear and ensure roll pin in
shaft engages in slot in centre plate.
' 9
I
10. Secure reverse shaft manufactured tool
"A".
11. Fit reverse gear thrust washer to shaft.
12. Fit fourth gear baulk ring.
13. Lubricate spigot bearing and fit input shaft.
14. Remove centre plate workstand and fit
gasket.
10
26 OVERHAUL