Land Rover DEFENDER LT77S - Manual (Page 31)

MANUAL GEARBOX
OVERHAUL
>-
I
FITTING GEARBOX CASING
27
1. Turn selector shaft and spool to neutral
2. Fit out-board detent ball and and secure
position.
with plug.
2
3. Fit guide studs to and check oil scoop
I S
4. Without using force, fit gearcase.
correctly fitted.
NOTE: Ensure that the centre plate
dowels and selector shaft are properly
located.
5. Secure centre plate and gearcase to workstand
6. Apply PL 32 to joint face and bolt threads and
with two 8 x bolts.
fit spool retainer.
not use force to fit retainer.
Provided the spool has not been
disturbed the retainer will slide into
position. If not, remove the gear case and
reposition spool or shaft.
7. Remove detent plug, apply Loctite 290 or
Hylomar PL 32 to thread, refit and stake.
8. Fit layshaft and input shaft bearing tracks.