Manualgearbox defender – Land Rover DEFENDER LT77S User Manual
Page 20
MANUALGEARBOX
DEFENDER
First-second synchromesh
8. Repeat instructions
for third-fourth
synchromesh.
Examine step in each
of
outer splines.
10.
Check that the step on both sides of the
internal splines are sharp not rounded.
NOTE: this applies only to splines on
selector groove side of member.
11.
Fit
inner member to outer
so
that the wide
splines of inner member are under the spur
gear teeth.
12.
Fit the slippers and secure with a spring each
of
the synchromesh.
NOTE: The hooked e n d of each spring
must locate in the same slipper with the
free ends running
in opposite directions
and
resting against the remaining slippers.
13.
Assemble third-fourth and fifth gear
synchromesh components as in instruction
12.
NOTE: The back plate for fifth gear is
fitted to the rear of the assembly with the
single tag locating
in a
slot i n the inner
member.
11
OVERHAUL