Lincoln MKT - Manual (Page 94)

• O Off: Select to shut the rear climate system off
• AUTO: Select to activate automatic control of the fan speed. The
system will automatically determine fan speed in order to reach and
maintain the desired temperature.
2. Rear driver side heated seat control (if equipped): Press to
activate. Refer to Heated and cooled seats in the Seating and Safety
Restraints chapter for more information.
3. Mode selector: Press repeatedly to select airflow as follows:
•
Vent: Directs air to the overhead vents of the second and third
row seating areas. The left light will be illuminated.
•
Floor: Directs air to the floor of the second or third row seating
areas. The right light will be illuminated.
•
Vent and Floor: Distributes air to the floor and overhead
vents of the second and third row seating areas. Both lights will be
illuminated.
4. Rear passenger side heated seat control (if equipped): Press
to activate. Refer to Heated and cooled seats in the Seating and Safety
Restraints chapter for more information.
5. Temperature selection: Turn to increase/decrease the air
temperature in the rear of the vehicle.
6. Rear passenger side cooled seat control (if equipped): Press
to activate. Refer to Heated and cooled seats in the Seating and Safety
Restraints chapter for more information.
7. AUTO : Press to activate automatic control of the airflow direction
in the rear of the vehicle. The system will automatically determine the
airflow distribution in order to reach and maintain the desired
temperature.
8. REAR LOCK: Illuminates when the rear (auxiliary) climate system is
being controlled by the front controls. The rear (auxiliary) climate
controls will not work when this is illuminated.
9. Rear driver side cooled seat control (if equipped): Press to
activate. Refer to Heated and cooled seats in the Seating and Safety
Restraints chapter for more information.
Climate Controls
94
2010 MKT (mkt)
Owners Guide, 1st Printing
USA (fus)