Liebert UPSTATION GXT 2U - Manual (Page 5)

1
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important safety instructions. Read all safety, instal-
lation, and operating instructions before operating the Uninterruptible
Power System (UPS). Adhere to all warnings on the unit and in this man-
ual. Follow all operating and user instructions. Individuals without previ-
ous training can install and operate this equipment.
It is not intended for use with life support and other designated “critical”
devices. Maximum load must not exceed that shown on the UPS rating
label. The UPS is designed for data processing equipment. If uncertain,
consult your local dealer or Liebert representative.
This UPS is designed for use on a properly grounded (earthed),
100-127 VAC, 50 Hz or 60 Hz supply.
ELECTROMAGNETIC COMPATIBILITY—The GXT 2U
™
Series com-
plies with the limits for a CLASS A DIGITAL DEVICE, PURSUANT TO
Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation. Operating this device in a residential area is
likely to cause harmful interference that users must correct at their own
expense.
Operate the UPS in an indoor environment only in an ambient tempera-
ture range of 32°F to +104°F (0°C to +40°C). Install it in a clean environ-
ment, free from moisture, flammable liquids, gases and corrosive
substances.
!
WARNING
OPENING OR REMOVING THE COVER MAY EXPOSE
YOU TO LETHAL VOLTAGES WITHIN THIS UNIT
EVEN WHEN IT IS APPARENTLY NOT OPERATING
AND THE INPUT WIRING IS DISCONNECTED FROM
THE ELECTRICAL SOURCE. OBSERVE ALL
CAUTIONS AND WARNINGS IN THIS MANUAL.
FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH. REFER ALL UPS AND BATTERY
SERVICE TO QUALIFIED SERVICE PERSONNEL. DO
NOT ATTEMPT TO SERVICE THIS PRODUCT
YOURSELF. NEVER WORK ALONE.