Using the printer control panel – Lexmark PRO700 User Manual
Page 6

Use the
To
11
Paper tray
Load paper.
12
Paper exit tray
Hold paper as it exits.
3
4
6
5
7
8
1
2
9
Use the
To
1
Scanner unit
Access the ink cartridges.
2
Ink cartridge access
Install, replace, or remove the ink cartridges.
3
Ethernet port
Connect your printer to a computer, a local network, an external DSL, or a
cable modem.
4
USB port
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
5
LINE port
LINE
Connect the printer to an active telephone line (through a standard wall
jack, DSL filter, or VoIP adapter) to send and receive faxes.
Use the
To
6
EXT port
EXT
Connect additional devices (telephone or answering machine) to the printer
and the telephone line. Use this port if you do not have a dedicated fax line
for the printer, and if this connection method is supported in your country
or region.
Note: Remove the plug to access the port.
7
Power supply with port Connect the printer to a power source using the power cord.
8
Duplex unit
•
Print on both sides of a sheet of paper.
•
Remove paper jams.
9
Printhead access
Install the printhead.
Note: The carrier moves to the printhead access area when no printhead
is installed in the printer.
Using the printer control panel
The following diagrams explain the sections of the printer control panel:
6