Listen Technologies Central Unit CU 6010 - Manual (Page 10)

Danish Interpretation Systems User Manual
Manual 01 18 04438 10
User Controls, indications & connectors
Front plate layout
The front plate layout of the CU 6010 Central Unit consists of a large illuminated LCD display and 8 buttons for
setting up/controlling the system:
Details of display
-Audio Control
-Delegate setup
-Interpreter setup
-Units info
MENU ENTER
Front plate controls
The CU 6010 Central unit features the following
controls and display:
Power switch
Switches power on to the whole system. When
power is switched ON at the CU 6010 any
connected
EX 6010 Extension Units will
automatically be powered up. An indication in the
switch is lighting, when power is switched ON
Fault LED
This indication lights up, if the internal power
supply is malfunctioning i.e. because of overheating
or overload of a chain.
The Fault LED will always light up some seconds
after the unit is switched on caused by the delayed
switching on of the four supplies.
As a warning the light is flashing at an internal
temperature above 45
°
C. At a temperature above
55
°
C or if one of the DCS-LAN outputs is
supplying no voltage, the LED is lighting
constantly.
Please note that the maximum ambient temperature
for the CU 6010 is 40 deg. Celsius.
LCD Display
This display is used for information purposes and
set-up purposes.