Linksys ETHERFAST 10/100 User Manual

Page 36

EtherFast

10/100 LAN Cards

2. Select Network PC Card from the list and click the Add button.

3. Highlight Protocol and click

the Add button.

4. Select Microsoft

from the list of
“ M a n u f a c t u r e r s ”
and TCP/IP from
the list of “Network
Protocols” and click
the OK button.

Note: Before adding
any network proto-
cols, verify that the
protocol is not already
installed. Never install
duplicate protocols.

Linksys Instant EtherFast

Series

IPX/SPX-compatible Protocol
Click the Add button. Choose Protocol and click the Add button. Select
Manufacturer and choose Microsoft. Under the Network Protocol box, high-
light IPX/SPX-compatible protocol. Click OK .The computer will begin copy-
ing files to your system. When the installation is complete, you will be asked
if you want to reboot. Click OK.

NetBEUI
Click the Add button. Select Protocol, then click Add. Under Manufacturer,
highlight Microsoft. Under Network Protocol, highlight NetBEUI. Click OK.
The computer will begin copying files to your system. When the installation is
complete, you will be asked if you want to reboot. Click OK.

TCP/IP
Click the Add button. Select Protocol, then click Add. Under Manufacturer,
highlight Microsoft. Under Network Protocol, highlight TCP/IP. Click OK.
The computer will begin copying files to your system. When the installation is
complete, you will be asked if you want to reboot. Click OK.

1. From the Start

Menu, select
Settings

and

bring up the
Control Panel.
From the Control
Panel, double-
click on the
Network icon.

Installing the Network Protocols for Windows 95, 98 and
Millennium