Linksys ETHERFAST 10/100 - Manual (Page 24)

42
Linksys Instant EtherFast ® Series
41
EtherFast ® 10/100 LAN Cards
3. When the list of available network adapters appears, click the Have Disk but-
ton.
4. Put the “Linksys LNE100TX (v5) Fast Ethernet Adapter Drivers” diskette
into drive A. Type A:\ into the box on your screen and click the OK button.
The following steps are for NT PCs that have networking already installed
according to the Windows NT documentation. If you have not already installed
networking onto your NT PC, please refer to your Windows documentation.
These steps will install the EtherFast
® Card’s driver software on your PC,
enabling your PC to properly communicate with the card. Remember that you
must be logged on as a network administrator to continue.
1. Click on Start, Settings, Control Panel, then double-click on the Network
icon.
2. When the networking window appears, choose the Adapters tab and click
the Add button.
Installing the EtherFast Network Driver if Networking is
Already Installed