Linksys ETHERFAST 10/100 User Manual

Page 15

EtherFast

10/100 LAN Cards

10. Choose the Access Control tab. Verify that Shared-level access control is

selected.

11. Click the OK button. Your system may ask you for your Windows 98 CD-

ROM or the location of the Windows 98 installation files. If it does, direct
Windows to the appropriate location, (i.e.,

D:\win98

if you have the

Windows 98 CD-ROM, or

C:\windows\options\cabs

12. Once Windows has copied the necessary files, the System Settings Change

window appears. Remove all disks from your PC and click the Yes button
to restart your PC. If you don't see this window, simply shut down Windows
98 and restart your PC. Remember to remove any installation disks or CD-
ROMs prior to rebooting.

Linksys Instant EtherFast

Series

6. After ensuring that all of the listed network components are installed on

your system, in the Primary Network Logon box select Client for
Microsoft Networks .

7. Click on the Identification tab. Type the name of your computer in the

Computer Name box. Choose a name that is unique from the other com-
puter names on the network.

8. Type

the

name of your workgroup in the Workgroup box. The Workgroup

name should be the same Workgroup Name in use by all of the other PCs
on the network. Use the same Workgroup Name that is in use on your other
computers for ease of use. Do NOT click the OK button when you are
done.

9. Enter

description of your computer in the Computer Description box.

This box is optional, and can be left blank.

otte

e:: Your Computer and Workgroup

Names must both be fewer than 15
characters, and should only consist
only of numbers and letters.