Linksys Etherfast User Manual

Page 28

EtherFast

Managed 24-Port with Dual Gigabit Switch

Protocol Configuration

The Protocol Configuration screen is used to globally enable or disable
unicast or multicast routing protocols for the Switch.

• ARP - Address Resolution Protocol. Select Advanced for additional

configuration.

• Proxy ARP - Proxy Address Resolution Protocol.

• RIP - Routing Information Protocol for unicast routing. Select

Advanced for additional configuration.

• DHCP Relay - Dynamic Host Configuration Protocol relay. Select

Advanced for additional configuration.

• IGMP Snooping - IGMP multicast filtering. Select Advanced for add-

tional configuration. (See page 64.)

• DVMRP - Distance-Vector Multicast Routing Protocol.

Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes.

EtherFast

Series

Add Subnet

The Add Subnet screen allows you to add an IP interface.

• VLAN - The VLAN associated with this IP interface.

• Select - Use this option to create or modify a VLAN.

• IP Address - The IP address associated with the specified VLAN

interface.

• Subnet Mask - A template that identifies the address bits in the

host address used for routing to specific subnets.

• Proxy ARP - Proxy Address Resolution Protocol.

• RIP - Routing Information Protocol for unicast routing.

• DVMRP - Distance-Vector Multicast Routing Protocol.

Select OK to confirm the changes. Select Cancel to cancel any changes.