Linksys RVS4000 - Manual (Page 37)

Chapter Setting Up and Configuring the Router
4-Port Gigabit Security Router with VPN
DHCP Server The status of the Router’s DHCP server
function is displayed here.
Start IP Address This shows the beginning of the range
of IP addresses used by the DHCP Server.
End IP Address This shows the end of the range of IP
addresses used by the DHCP Server.
DHCP Client Table Clicking this button will open a screen
showing you which PCs are utilizing the Router as a DHCP
server. On the DHCP Client Table screen, you will see a
list of DHCP clients (PCs and other network devices) with
the following information: Client Names, Interfaces, IP
Addresses, MAC Addresses, and the length of time before
their assigned IP addresses expire.
ARP/RARP Table Clicking this button will open a screen
showing you which PCs are utilizing the Router as an
ARP/RARP server. On the ARP/RARP Table screen, you will
see a list of ARPs/RARPs (PCs and other network devices)
with the following information: IP Addresses and MAC
Addresses.