Lincoln Electric RANGER IM511-D - Manual (Page 13)

INSTALLATION INSTRUCTIONS
Machine Grounding
Because this por table engine driven welder or
generator creates it’s own power, it is not necessary
to connect it’s frame to an earth ground, unless the
machine is connected to premises wiring (your home,
shop, etc.).
To prevent dangerous electric shock, other equipment
to which this engine driven welder supplies power
must:
a. be grounded to the frame of the welder using a
grounded type plug, or
b. be double insulated.
When this welder is mounted on a truck or trailer, it’s
frame must be securely connected to the metal frame
of the vehicle.
Where this engine driven welder is connected to
premises wiring, such as that in your home or shop,
it’s frame must be connected to the system earth
ground. See further connection instructions in the
section entitled Standby Power Connections in this
manual, as well as the article on grounding in the
latest U.S. National Electrical Code and the local
code.
In general, if the machine is to be grounded, it should
be connected with a #8 or larger copper wire to a
solid earth ground such as a metal water pipe going
into the ground for at least ten feet and having no
insulated joints, or to the metal framework of a
building which has been effectively grounded. The
U.S. National Electrical Code lists a number of
alternate means of grounding electrical equipment. A
machine grounding stud marked with the symbol
is provided on the front of the welder.
Spark Arrester
Some federal, state or local laws may require that
gasoline engines be equipped with exhaust spark
arresters when they are operated in certain locations
where unarrested sparks may present a fire hazard.
The standard muffler included with this welder does
not qualify as a spark arrester. When required by
local regulations, the K894-1 arrester must be
installed and properly maintained.
-11 -
Undercarriages
The recommended undercarriage for use with this
equipment for in-plant and yard towing by a vehicle (
1
)
is Lincoln’s K768-2. If the user adapts a non-Lincoln
undercarriage, he must assume responsibility that the
method of attachment and usage does not result in a
safety hazard nor damage the welding equipment.
Some of the factors to be considered are as follows:
(
1
) Consult applicable federal, state and local laws
regarding specific requirements for use on public
highways.
1. Design capacity of undercarriage vs. weight of
Lincoln equipment and likely additional
attachments.
2. Proper support of, and attachment to, the base of
the welding equipment so there will be no undue
stress to the framework.
3. Proper placement of the equipment on the
undercarriage to ensure stability side to side and
front to back when being moved and when standing
by itself while being operated or serviced.
Use of an incorrect arrester may lead to engine
damage or performance loss.
-----------------------------------------------------------------------
Do not attempt to use this equipment until you
have thoroughly read the engine manufacturer’s
manual supplied with your welder. It includes
important safety precautions, detailed engine
starting, operating and maintenance instructions,
and parts lists.
------------------------------------------------------------------------
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts or
electrode with skin or wet clothing.
• Insulate yourself from work and
ground
• Always wear dry insulating gloves.
------------------------------------------------------------------------
ENGINE EXHAUST can kill.
• Use in open, well ventilated areas or
vent exhaust outside.
------------------------------------------------------------------------
MOVING PARTS can injure.
• Do not operate with doors open or
guards off.
• Stop engine before servicing.
• Keep away from moving parts.
------------------------------------------------------------------------
See additional warning information at
front of this operator’s manual.
-----------------------------------------------------------
WARNING
CAUTION