Konica Minolta DiMAGE F200 - Manual (Page 70)

70 M
ULTI
-
FUNCTION RECORDING
Changes in color, sharpness, contrast, and saturation can be made using the custom 2 section of the
multi-function recording mode menu (p. 56). These imaging controls give photographers the ability to
maximize the image information at the scene.
Any changes made with these functions are applied to the live image on the monitor. Changes made
may be difficult to see on the monitor. However, when viewed with a computer, the changes will be
evident. The sharpness, contrast, and color-saturation levels must be set before the image is record-
ed. These functions can be used individually or in combination. Turning the camera off will not reset
these functions.
Digital Effects Control
Color Mode
The color mode controls whether a still image is color or black
and white. This must be set before the image is recorded. The
color mode is set in the custom 2 section of the multi-function
recording mode menu (p. 56). The live image on the monitor
reflects the selected color mode. The color mode has no effect
on image file size.
Natural Color reproduces the colors in the scene faithfully. This
mode uses no monitor indicator when active. Vivid Color
increases the saturation of the colors in the scene. Black &
White produces neutral monochrome images. The sepia mode
creates warm-tone monochrome images.
Black & White
Vivid Color
Sepia
Color saturation - to accent or subdue the color of a scene in three levels: high (+),
normal, and low (–).
Contrast - to increase or decrease the contrast of the scene in three levels: high (+),
normal, and low (–).
Sharpness - to accent or soften details in an image in three levels: hard (+), normal,
and soft (–).