Konica Minolta DiMAGE F200 - Manual (Page 51)

To adjust the exposure, press the
left or right controller key (1); the
exposure-compensation screen will
appear.
Use the left/right keys of the controller (2)
to adjust the exposure-compensation
value. Changes to exposure are visible in
the live image.
Press the shutter-release
button partway down
or press the central
button of the con-
troller to set the
adjustment.
1
The camera exposure can be adjusted to make the final picture lighter or darker by as much as ±2Ev
in 1/3 increments. For information on the use of exposure compensation, see page 74. In auto-
recording mode, exposure compensation is reset when the mode dial is moved to another position. In
multi-function recording mode exposure compensation will remain in effect until it has been reset.
Exposure compensation must be set before the image is captured. When making adjustments to
exposure, the amount of compensation is shown next to the exposure-compensation indicator on the
monitor. After the setting is made, the shutter-speed and aperture displays will indicate the actual
exposure. Because the exposure can be adjusted in fine steps, the shutter speed or aperture value
displayed may not change. When set to any value other than 0.0, the exposure-compensation indica-
tor will remain on the data panel and LCD monitor as a warning.
Exposure compensation
51