Konica Minolta DiMAGE F200 - Manual (Page 100)

100 S
ETUP MODE
LCD monitor brightness
The brightness of the LCD monitor can be set in eleven
levels. The brightness setting screen is opened from the
basic section of the setup menu (p. 98); the lens will
extend if retracted. Use the left/right keys of the controller
(1) to adjust the brightness, the monitor image will
change accordingly. Press the central button of the con-
troller (2) to set the brightness level.
Formatting memory cards
The formatting function is used to erase all data on a memory card. Before formatting a memory
card, copy the data to a computer or storage device. Locking images will not protect them from being
deleted when the card is formatted. Always format the memory card using the camera; never use a
computer to format a card.
When the format option is selected and entered in the basic section of the setup menu (p. 98), a con-
firmation screen will appear. Choosing “Yes” will format the card, choosing “No” will cancel the format-
ting operation. A screen will appear to indicate the card has been formatted.
If the card-not-recognized message appears, the inserted card in the camera may need to be format-
ted. A memory card used in another camera may also have to be formatted before being used. If the
unable-to-use-card message appears, the card is not compatible with the camera and cannot be for-
matted.
High
1
2
When a memory card is formatted, all data on the card is erased.
Low
:enter