Konica Minolta DiMAGE F200 - Manual (Page 42)

This mode makes a three-image bracket of a scene. Bracketing is a method of taking a series of
images of a static subject in which each image has a slight variation in exposure. The bracketing
mode is set with the drive-mode button (p. 38). Brackets cannot be made with TIFF images (p. 46).
The order of the bracket series is normal exposure, underexposure, and overexposure. The exposure
bracket can be made in 0.3, 0.5, or 1.0 Ev increments (p. 73). The larger the number, the greater the
difference in exposure between the images in the bracketed series.
42 A
UTO
-
RECORDING MODE
-
ADVANCED OPERATION
Bracketing
select enter
Immediately after selecting the bracketing drive mode
with the drive-mode button, a selection screen is dis-
played so that the bracking increment can be set.
Press the left/right keys of the controller (1) to select
the bracketing increment. Press the central button of
the controller (2) to set the value. To change the
increment, select the bracketing drive mode again
with the drive-mode button. After the bracketing incre-
ment is set, the left/right controller keys are used for
exposure compensation (p. 51)
1
2
0.3 Ev
bracket 0.5 Ev
bracket 1.0 Ev
bracket
Normal
Under
Over