KVH Industries TracVision R4 - Manual (Page 29)

3. Type SATINSTALL, ,
and press Enter. Type None as the
name of Satellite B if wish to install only one satellite.
Key: = the name of your choice for
Satellite A
= the name of your choice for
Satellite B
4. Type L,X and press Enter to select which of these
two satellites the antenna should begin tracking.
Key: X = A or B (one of your selectedd satellites defined
during the install process)
5. Type ZAP and press Enter to restart the system. Be
sure the receiver’s satellite configuration matches
your chosen TracVision R5/R4 settings.
For example, to assign Astra 2S and Hotbird for your satellite
pair, and to track Astra 2S, you would enter the following data:
SATINSTALL,ASTRA2,HOTBIRD
@L,A
ZAP
2-18
A Guide to TracVision R5/R4