Kenwood DPX-MP6110U User Manual
Page 7
English
|
7
Category Item
Setting
Entry
Setting overview
Condition Page
“S-CTRL” “EQ”
Sets the sound quality.
18
“POSIT”
Compensates the sound environment in accordance with
the listening position.
18/19
“LOUD” “OFF”*/ “ON”
Compensates high and low pitch sound at lower volume.
“PRESET”
Presets the setting value of the audio control. The preset
value is retained after resetting.
19
DISP
“TYPE”
A/ B/ C/ D
Sets the display pattern.
—
8
“GRAPH”
Spectrum Analyzer 1 – 2
Sets the Type D spectrum analyzer display.
Î
“SIDE”
Text icon/ Source
icon/ OFF
Sets the Type A/B side icon display.
Åı
“TEXT”
Sets the text display.
ÅıÇ
9
Color
Sets the panel illumination color.
10
P.MEM
Presets a station.
14
SCAN*1
“ON”/ —
When set to “ON”, plays the intro of the music in the folder
successively.
RDM
“ON”/ —
When set to “ON”, plays the music in the folder randomly.
FiREP
“ON”/ —
When set to “ON”, plays the music repeatedly.
FoREP
“ON”/ —
When set to “ON”, plays the music in the folder repeatedly.
SCAN
“ON”/ —
When set to “ON”, plays the intro of the music on the disc
successively.
RDM
“ON”/ —
When set to “ON”, plays the music on the disc randomly.
M.RDM
“ON”/ —
When set to “ON”, plays the music in the disc changer
randomly.
T.REP
“ON”/ —
When set to “ON”, plays the music repeatedly.
D.REP
“ON”/ —
When set to “ON”, plays the music on the disc repeatedly.
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting “2 ZONE” of
: Sets “ILM MSC SYNC” and “AT COL CHG” in the
menu to “OFF”.
: Refer to the reference page.
Е–П : Can be set when the specified type is selected for
Display Type.
— : Can be set during all sources.
*Factory setting
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
• “ILM MSC SYNC” is displayed when “MENU”
>
“AT COL
CHG” in
• *1 Location played with “File Scan”
- Audio file: First 10 seconds
- Music Editor media: First 10 seconds or the part picked
by Intro Skip.
During Intro Skip, turn the control knob left or right to
change the song.
The scan method depends on the Music Editor setting.
See the Music Editor help for details.
Next page
3