Basic operation – Kenwood DPX-MP6110U User Manual
Page 4
4
|
DPX-MP6110U
General functions
Power/Source Select button : [SRC]
Turns on the power.
When the power is ON, select a source.
SRC Select mode 1: Press the [SRC] button and then
turn the Control knob or push it toward left or right.
To determine the selected source, press the Control
knob.
SRC Select mode 2: Pressing this button each time
switches between sources.
Tuner (“TUNER”), USB or iPod (“USB” or “iPod”), CD
(“Compact Disc”), Auxiliary input (“AUX”), and Standby
(“STANDBY”)
Press at least 1 second to turn off the power.
⁄
• The SRC Select mode can be set in “MENU”
>
“SRC Select” of
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
• USB (iPod) source is recognized as CD source on the
connected unit.
Volume control : [AUD]
Turn the knob to adjust the volume.
Attenuator : [ATT]
Turning the volume down quickly.
When the volume is reduced, the “ATT” indicator
flashes.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to
27).
Auxiliary input : Auxiliary input
Connect a portable audio device with mini-plug
cable (ø3.5 mm).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
• The auxiliary input requires the setting made in “MENU”
>
“Built in AUX” of
Subwoofer output : Control knob
Switches between ON (“SUBWOOFER ON”) and OFF
(“SUBWOOFER OFF”) each time pushing toward down
for at least 2 seconds.
Function Control : [FNC]
Pressing this button allows you to set various
functions using the Control knob. Refer to
Category
Function of setup item
MENU
Allows you to set up the environment.
SOUND
Allows you to set up the sound environment.
DISP
Allows you to set up the display.
COLOR
Allows you to set up the illumination color.
Basic Operation
[AUD]
[1]—[6]
[ATT]
[AUTO]
[FNC]
[
]
[SRC]
Auxiliary input
Disc slot
Control knob
USB Terminal