Kodak i1800 Series - Manual (Page 9)

A-61555 March 2007 1-5
Safety information
Warning labels
MSDS Material Safety Data Sheets (MSDS) are available on the Kodak
website at: www.kodak.com/go/msds. When accessing the MSDSs
from the website, you will be required to provide the catalog number of
the consumable for the Material Safety Data Sheet you are requesting.
See Chapter 5, “Supplies, consumables and accessories” for
consumables and catalog numbers.
User precautions Users and their employer need to observe the common sense
precautions applicable to the operation of any machinery. These
include, but are not limited to, the following:
• Do not wear loose clothing, unbuttoned sleeves, etc.
• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
• Hair length should be kept short, using a hair net if needed, or tying
long hair up in a bundle.
• Remove all other loose objects from the area that could be drawn into
the machine.
• Take sufficient breaks to maintain mental alertness.
• Use only the recommended cleaning supplies.
• Do not use canned/compressed air.
Supervisors should review their practices and make compliance with
these precautions a part of the job description for operation of the
scanner or any mechanical device.
Gas springs warning Do not attempt to repair the gas springs. These are designed to be
replaced by a Kodak Field Engineer.
CAUTION: Moving parts, avoid contact.
CAUTION: Hot surface, avoid contact.