Kodak i1800 Series - Manual (Page 21)

A-61555 March 2007 3-5
Adjusting the input
elevator
Adjusting the side guides 1. Place the documents in the input elevator.
2. Adjust the side guides to fit the documents. The side guides should
be far enough apart to accommodate the widest document that you
are feeding.
Selecting your feeding
position The side guides can be adjusted for right-edge, left-edge or center
feeding. The side guides can be moved together for center feeding or
independently for offset feeding (right-edge or left-edge).
When using the Enhanced Printer, documents should be placed in the
input elevator in a manner that will align the print string in the proper
location. Offset feeding may be required.
If your stack of documents contain mixed sizes and has been left- or
right-edge aligned, adjust the side guides for offset feeding.
Locking the side guides Side guides may be locked into position after they are adjusted. This
may be helpful when the placement of print strings is important.
If you want to lock the side guides into position, move any documents
which may be in the input tray and move the locking switch into the
locked position.