Kodak i1800 Series - Manual (Page 23)

A-61555 March 2007 3-7
Installing the document
extender • Insert the ends of the document extender into the holes on the input
elevator and lower the extender into position.
Output tray options
The scanner is shipped with a standard output tray and a short
document tray. Use the short document tray when scanning documents
less than 15.2 cm (6 in.) in length and 13.9 cm (5.5 in.) in width. See the
section entitled “Adjusting the short document tray” for more
information.
Adjusting the output
tray
The output tray can be adjusted to a variety of positions to meet your
stacking needs. Factors which determine the optimum output tray
position are size and weight of your paper and the number of
documents to be stacked in the output tray at one time.
Adjusting the side guides • Adjust the side guides on the output tray to match the position of the
side guides on the input elevator.