Kenwood KRF-V6300D - Manual (Page 39)

English
39
Adjusting the sound
TONE
BASS BOOST
MULTI CONTROL
O/
ACTIVE EQ
MULTI CONTROL ACTIVE EQ
Adjusting the Tone Adjusting the Tone
¶ Operation available only on the remote control unit.
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo".
œ Press [TONE] to select the Tone mode.
∑ Use [MULTI CONTROL ∞/5] to select "TONE ON" or
"TONE OFF".
é When in "TONE ON" selection, press [TONE] for the
following displays.
Display Setting Range
"BASS" Adjusts low frequency range. -10 – +10 (in 2 step)
"TREB" Adjusts high frequency range. -10 – +10 (in 2 step)
® Use [MULTI CONTROL ∞/5] to adjust the sound
quality.
† Press [TONE].
• When the ACTIVE EQ mode is set to ON, set it to OFF and then
control the TONE setting.
Bass Boost Bass Boost
¶ Operation available only on the remote control unit.
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo".
Press [BASS BOOST].
Press the key once to select the maximum (+10) low
frequency emphasis setting.
TONE will automatically be turned ON.
To cancel
Press [BASS BOOST] again.
• Bass Boost does not function when this unit is in the sound
quality or ambience effects adjustment mode.
• When the ACTIVE EQ mode is set to ON, set it to OFF and then
control the Bass Boost setting.
ACTIVE EQ mode ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in
PCM and analog stereo mode.
Press [ACTIVE EQ] for the following selections.
Display Setting
"ACTIVE EQ MUSIC" Effective when listening to music.
"ACTIVE EQ CINEMA" Effective when watching a movie.
"ACTIVE EQ GAME" Effective when playing a game.
"ACTIVE EQ OFF" Active EQ function is off.
ACTIVE EQ indicator lights up.
• ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON.