Playback – Kenwood KRF-V6300D User Manual
Page 27
English
27
Playback
VOLUME CONTROL
VOLUME
/o
INPUT SELECTOR AV AUX
œ Select the source you want to play.
Use the Input source keys on the remote control unit to
select a source.
Or use [INPUT SELECTOR] knob or [AV AUX] key.
∑ Start playback from the selected source.
é Use [VOLUME
%/fi] to adjust the volume.
® Enjoy various surround effects.
You can enjoy a variety of listen modes (
ª).
The surround effects can be fine tuned according to the
selected input source (
‚).
• The AV AUX cannot be selected with the [INPUT SELECTOR] knob
of this unit. This input should be selected using the [AV AUX] on
this unit or the [AV AUX] key on the remote control unit.
Monitoring the input source in
the original sound (STRAIGHT
DECODE)
The signal input from a source can be output directly without any
sound field effect added to it.
STRAIGHT DECODE
œ Select the source you want to play.
∑ Start playback from the selected source.
é Press [STRAIGHT DECODE].
STRAIGT DECODE indicator lights up.
When STRAIGHT DECODE is enabled, the listen mode
is selected automatically according to the input signal.
(
ª).
To cancel
Press [STRAIGHT DECODE] again.
STRAIGHT DECODE is also canceled when the listen
mode is changed.
• When the input mode is "6CH INPT", the listen mode does not
change. (
§)
• If the input signal uses a number of channels larger than
the number of speakers in use, the signals are distributed
automatically according to the available speakers.
Input source keys