Kenwood KRF-V6300D - Manual (Page 37)

English
37
œ Press [PTY] to activate the PTY search mode.
When an RDS broadcast is received, the program type is
shown on the display. If no PTY data is available, or if the
station is not an RDS station, "NONE" is displayed.
∑ While the "PTY" indicator is lit, use [TUNING
1/¡] to select the program type of your choice.
Program type Display Program type Display
Pop Music "POP M" Weather "WEATHER"
Rock Music "ROCK M" Finance "FINANCE"
Easy Music "EASY M" Children's Program "CHILDREN"
Light Classical Music "LIGHT M" Social Affairs "SOCIAL"
Serious Classical Music "CLASSICS" Religion "RELIGION"
Other Music "OTHER M" Phone In "PHONE IN"
News "NEWS" Travel "TRAVEL"
Current Affairs "AFFAIRS" Leisure "LEISURE"
Information "INFO" Jazz Music "JAZZ"
Sport "SPORT" Country Music "COUNTRY"
Education "EDUCATE" National Music "NATION M"
Drama "DRAMA" Oldies Music "OLDIES"
Culture "CULTURE" Folk Music "FOLK M"
Science "SCIENCE" Documentary "DOCUMENT"
Varied Speech "VARIED"
é Press [PTY] to start searching.
Example: Searching for a Rock Music broadcast.
Display while searching.
Blinks
Program type name display
Display when a station is received.
Goes out
Station name display
To select another program type
Repeat steps œ, ∑ and é.
• [MULTI CONTROL ∞/5] can also be used to select a station.
• No sound is heard while "PTY" is blinking.
• If the desired program type cannot be found, "NO PROG" is
displayed, then after several seconds the display returns to the
original display.
Using the RDS DISP. key
RDS DISP.
Pressing [RDS DISP.] changes the contents of the
display.
Each press switches the display mode as follows:
1 PS (Program Service) name display
2 RT (Radio Text) display
3 Frequency display
1 PS (Program Service) name display:
The station name is displayed automatically when an
RDS broadcast is received.
If no PS data was sent, "NO PS" is displayed.
2 RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls
across the display. "NO RT" or "RT----" is displayed if
the current RDS station does not provide RT data.
3 Frequency display:
Displays the frequency of the current station.