Kenwood CT-403 - Manual (Page 6)

6
PHONO CD TUNER TAPE
REC PLAY
L
R
LINE IN
REC PLAY
LINE OUT
SYSTEM CONTROL
L
R
0 7 6
4 ¢
1 ¡
R
L
SYSTEM
CONTROL
SYSTEM
CONTROL
System connections
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at rear of the unit.
Notes Notes Notes
( Except for U.S.A., Canada )
Amplifier or Receiver
Audio cord
Turntable
CD player
To AC outlet Audio cord
Caution:
Do not plug in the power lead until all connections are com-
pleted.
Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including projection)
equal or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
SL-16
SL-16
System control
cord
System control
cord