beautypg.com

Rear panel – KORG BX-3 User Manual

Page 9

background image

Introduction

9

Rear panel

6

5

4

3

2

1

1. MIDI IN connector

Musical data and sound settings etc. can be received
at this connector.
Use this connector when you wish to play the CX-3’s
tone generator from a connected MIDI device.

MIDI OUT connector

Music data and sound settings etc. can be transmitted
from this connector.
Use this connector when you wish to control a
connected MIDI device.

MIDI THRU connector

Music data and sound settings etc. received at the
MIDI IN connector are re-transmitted without change
from this connector.
Use this connector when you wish to connect multiple
MIDI devices.

2. EXPRESSION PEDAL jack

Connect the included expression pedal to this jack.
For details on the function of the expression pedal,
refer to “5. Operation of included Expression pedal”
(p.44).

3. ASSIGNABLE PEDAL/SW 1, 2 jacks

On/off-type pedal switches (separately sold Korg PS-
1 pedal switches), or separately sold Korg EXP-2 foot
controllers or XVP-10 expression/volume pedals can
be connected to these jacks.

4. OUTPUT L, R jacks

Connect these jacks to the INPUT jacks of your amp or
mixer.
These are unbalanced phone jacks.
When connecting in stereo, use the L and R jacks.
When connecting in monaural, use the L jack.

5. Power switch

This turns the power on/off.

6. AC power inlet

Connect the included power cable here.
After connecting the power cable to the CX-3, plug it
into an AC outlet.